STIHL MS 382 Chainsaw

The STIHL MS 382 chainsaw is ideal for felling and processing medium-sized trees in forestry and agriculture. It is easy to operate, highly reliable and easy to maintain.

• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive STIHL feature. It is a starter handle with a built-in shock absorber that helps reduce effort and make starting easier. ElastoStart™ noticeably reduces the sudden peak forces (compression) that are usually felt when starting. The forces that occur after the first compression stroke when pressing are eliminated.
• Ematic™ Oiling System - The Ematic™ cutting blade, when used with a STIHL OILOMATIC® chain, provides proper lubrication and uses less oil than conventional methods. The system works because two strategically placed ramps on the cutting blade help maintain the oil flow and direct oil to the guide bar and chain, as well as to the chain’s attachment points, which in turn reduces oil consumption by up to 50%.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain-stop system designed to reduce the risk of injury in certain impact situations. It is called the STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the chain rotation when activated by the operator's hand or by inertia if the saw is kicked back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain in fractions of a second.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ compensating carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially blocked, maintaining the correct engine RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and fuel flow. When the air filter becomes dirty and less air is available to the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the reduced air flow. This is different from typical carburetors that use this air from the “dirty” side of the airbox.
• Anti-Vibration System - STIHL has developed a system to reduce the vibration level of handheld outdoor power tools. The STIHL Anti-Vibration System helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy-to-use control lever that operates the choke, start throttle lockout, and on-off switch. The operator must pull up on the throttle trigger before moving the lever to the choke position.
• Controlled delivery oil pump - Different lengths of trees, branches, logs, wood types, and sawing techniques require different amounts of oil. The controlled delivery oil pump allows the user to select the exact amount of oil they need for a given job.
• Tool-free fuel and oil caps with retainers - simply lift the lever and twist the caps to remove or tighten. No need to use a tool to tighten or loosen.
• Decompression valve - is part of the easy start system. The valve should be pressed before starting to reduce the compression pressure during starting, as well as  to reduce the effort required for the cranking rope.
• Side chain tensioner - This feature makes it much more convenient for the user to adjust the chain with a bar end wrench.
• Pre-Separation Air Filtration System - This time-saving technology increases the efficiency of the engine's filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated by centrifugal force, removing heavier dirt particles before being sent to the air filter. This pre-separation means less dirt is trapped by the air filter, which means less frequent cleaning and maintenance.

Equipment

• Chainsaw MS 382
• 63 cm Rollomatic E
• Cutting chain 3/8" - 84 teeth
• Clamp/removable wrench
• Passport/Instruction (MANUAL)
• Warranty

You will need a chainsaw to work.

• Fuel (minimum octane 90) Premium <91 - 94>
• STIHL HP 2-Stroke Engine Oil
• STIHL ForestPlus chainsaw oil

------------------------------------------------------------------------------

The chainsaw can be fitted with the following bar lengths:

• 40 cm - 60 teeth - 3/8" - 1.6 mm
• 45 cm - 66 teeth - 3/8" - 1.6 mm 
• 50 cm - 72 teeth - 3/8" - 1.6 mm 
• 63 cm - 84 teeth - 3/8" - 1.6 mm (set)